Printronix L5520 User Manual Page 101

  • Download
  • Add to my manuals
  • Print
  • Page
    / 244
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 100
Downloading Into Flash Memory
101
6. Repeat step 5 for any additional font files to be converted.
7. To convert a setup file, enter a command at the DOS prompt
such as:
lasr2fls setup.ptx setup.dwn setup.ptx A
<Return>
where
setup.ptx
is the name of one of the setup files you
want to convert. This command converts the specified setup
file, creating the downloadable file
setup.dwn
.
8. Repeat step 7 for any additional setup files to be converted.
9. To convert other kinds of files (a logo or form file, for example),
enter a command at the DOS prompt such as:
lasr2fls my_logo.xxx my_logo.dwn my_logo.xxx A
<Return>
where
my_logo.xxx
is the name of one of the form or logo
files you want to convert. This command converts the specified
logo or form file, creating the downloadable file
my_logo.dwn
.
10. Repeat step 9 for any additional logo and form files to be
converted.
11. Proceed to the next section to download the converted files.
IMPORTANT
Be sure that you always enter the “A” parameter on the
lasr2fls
command line, as indicated above.
Downloading Into Flash Memory
CAUTION
When downloading an emulation to the printer, all other
optional font files, customer-supplied logos, and setup files
will be erased. You will then need to reload these files. Before
starting a download procedure, be sure that you have all of the
necessary installation files on hand.
CAUTION
Do not interrupt the downloading process. Interrupting a
download will damage the flash memory on the controller
board and PrintNet card.
Page view 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 243 244

Comments to this Manuals

No comments